KA7500B.SMPS控制器.pdfVIP

KA7500B SMPS Controller Features Description • Internal Regulator Provides a Stable 5V Reference Supply The KA7500B is used for the control circuit of the PWM Trimmed to 5% switching regulator. The KA7500B consists of 5V reference • Uncommitted Output TR for 200mA Sink or Source voltage circuit, two error amplifiers, a flip flop, an output Current control circuit, a PWM comparator, a dead time comparator • Output Control For Push-Pull or Single Ended Operation and an oscillator. This device can be operated in the • Variable Duty Cycle By Dead Time Control (Pin 4) switching frequency of 1kHz to 300kHz. Complete PWM Control Circuit • On-Chip Oscillator With Master or Slave Operation 16-DIP • Internal Circuit Prohibits Double Pulse at Either Output 1 16-SOP 1 Internal Block Diagram Rev. 1.0.0 ©2002 Fairchild Semiconductor Corporation KA7500B Absolute Maximum Ratings Parameter Symbol Value Unit Supply Voltage VCC 42 V Collector Supply Voltage VC 42 V Output Current IO 250 mA Amplifier Input Voltage