冰箱压缩机内部产生白色颗粒的分析与研究.pdf

2007 1 15 ∗ Analysis and Investigation of White Wear Produced in the Inner of the Refrigerator Compressor Li Jiasong Wang Xiaoliang Abstract In terms of the white wear appeared inside the compressor after high temperature test, the paper introduced the method of determining which material can create white wear , analyzed the white wear forming mechanism, and finally proposed the solving methods. Key words white wear; spectral analysis; PET material; insulation polyester piece; motor colligation wire; high temperature dissolve test. PET PBT CECOMAF 20 m 100 m 1 PET 130 2000 HC-10 R600a 1 测试工况 吸气压力 MPa 排气压力 MPa 蒸发温度℃ 冷凝温度℃ 环境温度℃ R600a 0.07±0.05 0.77±0.15 -10±5 +55±5 35±5 高温寿命实验工况 绕组温度 130℃，连续 2000 小时 压缩机内绑扎线 压缩机内聚酯片 产生白色颗粒情况 有 有 较多 无 有 一般 有 无 少量 无 无 无 ∗ 16 2007 1 HC-10 R600a 150 14 SUNOCO 1GS-AJ