刘庆伟最终毕业设计论文.docVIP

南 阳 理 工 学 院 本科生毕业设计（论文） 学院（系）： 电子与电气工程 专 业： 自动化 学 生： 指导教师 殷华文 完成日期 201 年 月  南阳理工学院本科生毕业设计（论文） Research of Process Control Based on Size of Inertial Object 总 计：毕业设计（论文）页 表 格： 个插 图： 幅南 阳 理 工 学 院 本 科 毕 业 设 计（论文） 基于大小惯性对象的过程控制研究 Research of Process Control Based on Size of Inertial Object 学 院（系）： 电子与电气工程 专 业： 自动化 学 生 姓 名： 学 号： 指 导 教 师（职称）： 殷华文（副教授） 评 阅 教 师： 完 成 日 期： 南阳理工学院 NanInstitute of Technology 基于大小惯性对象的过程控制研究 自动化专业 ［摘 要］ ［关键词］；；；esearch of Process Control Based on Size of Inertial Object Automation Specialty LIU Qing-wei Abstract: The design has studied different inertia of object control characteristics by using pressure, flow, liquid level and temperature links of the process control experimental device as the experimental object. Firstly, it has achieved four objects of the open-loop control ,acquisition of response curve and calculated the mathematical model of the object by using AI intelligent instrument .Secondly, it has also achieved the four model of the closed loop control , repeated testing after getting the optimal control parameters by using AI Intelligent instrument. Then it simulates proportional-integral-derivative algorithm of the four models through the MATLAB Simulink. Finally, according to the analysis of experimental data and the simulation results, it has summarized contrast, pressure, flow, liquid level and temperature of the four objects inertia characteristics, reaching a conclusion that we should use AI intelligent instrument and conventional proportional integral differential control algorithm features and the differences between them when facing size inertial object . Key words: AI intelligent instrument; mathematical model; simulation; proportio