采用ABAQUSExplicit分析滚动轮胎与变形地面相互作用.pdfVIP

汽车制造技术 现代制造工程(Modern Manufacturing F.ngineering) 2012 年第 12 期 采用 ABAQUS/Explicit 分析滚动轮胎与 变形地面相互作用 任茂文l ，韩卿2 ，张晓阳2 (1宿迁学院，宿迁 223800;2 东南大学，南京 210096) 摘要:建立三维土壤弹塑性模型与轮胎模型，通过试验验证模型的可靠性，并用显示算法计算滚动轮胎与变形地面间接 触时的相互作用，获得了滚动轮胎与地面接触时力与变形情况。有限元计算结果表明，此方法可以有效地分析轮胎与 变形地面相互作用的问题。 关键词:有限元;轮胎:变形地面;接触 中图分类号:U463. 33 文献标志码:A 文章编号:1671--3133(2012)12--0040--05 The analysis on the interaction between the rolling tire and the deformed grouod based 00 ABAQUS/Explicit 1 2 Ren Maowen ,Han Qing ,Zhang Xiaoyanl (1 Suqian Collcge , Suqian 223800 , Jiangsu , China;2 Southeast University , Nanjing 210096 , China) 气Abstract: The 山ee dimensional elastic-plastic model of soil and that of tire have been created and the availability of the model has been proved through experiments. The interaction helween the rolling tire and the deformed ground has been worked out by display algorithm and the stresses and deformation of the rolling tire and the ground has been obtained. The results of finite ele- ment calculation proved that this method could be used to effectively analyze the interaction between the tire and the deformed ground. Key words: finÎt e element; tire ;deformed ground; contact 本构模型是在对土木工程所用土的本构关系试验条 。 引言 件进行修正后得到的c 从连续介质力学本构模型的 近年来对工程车辆轮胎与变形地面相互作用的 角度看，车辆行驶士的本构模型可以分为弹性本构模 研究越来越受到关注，也取得了很多成果[1.5J 。在研 型和弹塑性本构模型两大类，弹塑性本构模型的优点