预应力筋粘结形式对框架复位性能的影响.PDFVIP

建筑结构/Building Structure, 2008, 38(8): 57-60. 预应力筋粘结形式对框架复位性能的影响* 1 2 2 汪训流 ，叶列平 ，陆新征 （1 中国电子工程设计院结构评估及加固所 北京 100840 ；2 清华大学土木工程系 北京 100084 ） [提要] 残余变形是衡量结构震后能否继续满足使用要求和可修复性的重要指标。首先提出以残余变形为目标的 结构或构件复位性能的基本概念；然后利用已开发并经试验验证的纤维模型程序，完成了一榀预应力混凝土框架 试件在不同预应力筋粘结形式下的数值模拟，初步探讨了预应力筋粘结形式对结构复位性能的影响。计算结果表 明，对于按规范设计的预应力混凝土框架，框架柱预应力筋粘结形式对框架的复位性能产生较大影响，而框架梁 预应力筋的影响则相对较小。据数值分析结果，从结构整体性能角度出发，实际工程中预应力筋宜优先采用部分 无粘结形式。 [关键词] 预应力混凝土 框架结构 纤维模型 粘结形式 复位性能 部分无粘结 Analysis to Influence by Bonding Styles of Prestressed Strands/Steels on Re-centering Behavior of Prestressed Concrete Frames 1 2 2 Wang Xunliu ，Ye Lieping ，Lu Xinzheng (1 China Electronics Engineering Design Institute，Beijing 100840 ，China ；2 Department of Civil Engineering, Tsinghua University ，Beijing 100084 ，China) Abstract ：Residual deformation is a key index to assess whether a structure can be reused or restored after an earthquake. In this paper, a PC frame has been simulated with various bonding styles of PS by a fiber model program developed and validated with test data in this study, and some simple discussions on the effect on re-centering behavior of the bonding styles of PS have been given. The results of simulation indicate that, as to PC frames designed according to codes in existence, the bonding style of PS used for columns has great influence on the re-centering behavior of PC frame, while the PS of beams have relatively little effect. According to the numerical results and considering the entire performance of PC frames, it should take priority to use the partially debonding style of PS in the engineering prac