塑料模具设计中英文翻译.doc

XX学院毕业设计（论文） 外文文献 学 院 机电学院 专业班级 XX成型一 学生姓名 XX 指导教师 XXX A. Mold Componets Molds used in injection molding consist of two halves; one stationary and one movable. The stationary half is fastened directly to the stationary platen and is in direct contact with the nozzle of the injection unit during operation. The movable half of the mold is secured to the movable platen and usually contains the ejector mechanism. There are many possible mold designa, including multiple piece molds for complicated parts.