A1,A2,A3,A4 纸的尺寸大小（国外英文资料）.docVIP

A1,A2,A3,A4 纸的尺寸大小（国外英文资料） Knowledge priority: A1, A2, A3, A4 size of paper, | A4 paper with resolution, |, ABC paper size! Paper size: The size of a piece of paper is made of paper and then trimmed to a certain size. In the past, the size of the paper was represented by how much open (e.g., 8, 16, etc.), and now I adopt the international standard, which is A0, A1, A2, B1, B2... Such markers represent the size of the paper. The ratio of the width of the paper to the width of the paper (in terms of X) and length (in terms of Y) is X: Y = 1:. According to the basic area of the paper, the size is divided into A series, B series and C series, which is 841mm by 1189mm, and the width is 1 square meter. The size of B0 is 1000mm by 1414mm, and the area is 2.5 square meters. The size of C0 is 917mm by 1279mm, with a width of 2.25 square meters. The size of the paper is only used in series A and B. If the A0 paper is divided into two equal parts in length, it becomes the A1 specification, and the A piece of paper is split in the direction of the length, so it becomes the A2 specification, which is the same as the A8 specification. B8 paper is also opened to B8 specification. The size of A0 ~ A8 and B0 ~ B8 are shown in the table below. Among them, A3, A4, A5, A6 and B4, B5, B6 7 are the usual specifications for photocopier paper. Size of paper Gauge width (mm) length (mm) length (mm) length (mm) length (mm) A nought. A1 A2 A3 A4 The A5 A6 A7 A8 841 594 420 297 210 148 105 74 52, 1189 841 594 420 297 210 148 105 74 B0 B1 B2 B3 B4 B5 B6 B7 B8 1000 707 500 353 250 176 125 88 62, 1414, 1000 707 500 353 250 176 125 88 If the paper specifications in the front of the lettered add a letter R (or S), the paper is said without cutting burrs, after trimming trim will be reduced to the standard size, for example RA4 (or SA4) said no trimming paper size is 240 mm * 330 mm, after trimming trim its size is 210 mm * 297 mm. If ratio magnification rate or the copy, use, the specification has