基于CB形态学和灰度码分解的纸病检测.PDFVIP

网络出版时间：2016-08-10 10:57:07 网络出版地址：/kcms/detail/11.2127.TP1057.070.html 1 Computer Engineering and Applications 计算机工程与应用 基于CB 形态学和灰度码分解的纸病检测 亢 洁, 潘思璐, 王晓东 KANG Jie, PAN Silu, WANG Xiaodong 陕西科技大学 电气与信息工程学院, 西安710021 School of Electrical and Information Engineering, Shaanxi University of Science and Technology, Xi’an 710021, China KANG Jie, PAN Silu, WANG Xiaodong. Paper defect detection based on CB morphology and gray-code decomposition. Computer Engineering and Applications Abstract ：Traditional paper defect detection algorithms have the problem of poor anti-interference ability, inaccu- rate positioning, complex computation. Considering this, a paper defect detection algorithm based on CB morphol- ogy and gray-code decomposition was presented. Firstly, the noise of the images containing paper defects would be filtered by multi-scale CB morphology. Then, the filtered images were decomposed by gray-code decomposition. Finally, the edge of the important bitplane would be detected by multi-structural elements CB morphology. The si- mulation results show that ，this method is easily calculated ，has a better anti-interference ability, and can accurately locate the paper defects. Key words ：CB morphology; gray-code decomposition; paper defect detection 摘 要：传统纸病检测算法抗干扰能力差、定位不准确和运算复杂，针对该问题，提出了一种基于轮廓结构 元素形态学和灰度码分解的纸病检测算法。首先，采用多尺度CB 形态滤波算法对纸病图像进行滤波，再进 行灰度码分解，最后运用多结构元素CB 形态学提取重要位面图的边缘。仿真结果表明，该算法运算简单， 具有较好的抗干扰能力，并能够较准确地定位纸病缺陷。 关键词：CB 形态学；灰度码分解；纸病检测 doi:10.3778/j.issn.1002-8331.1603-0355 文献标志码: A 中图分类号: TS736+.2 [9] 次实验或经验来选择 。基于分形维数的斱法定位 1 引言 精度较差，常会出现误检的情况。基于小波变换的 有兲纸病检测的研究取得了很大的迚展，包括 斱法对于小波尺