化学解题方法（国外英文资料）.doc

化学解题方法（国外英文资料） Differential method is based on chemical reactions before and after some of the delta (solid quality is poor, the poor quality of the solution, the molar ratio of gas volume, gas etc) is proportional to the change of reactants or products and to establish a method to solve problems. This method will be delta as a chemical equation to the right one, will be known delta (delta) actually and chemical equation the corresponding dispersion theory (delta) is proportional to the column, the other problem solving steps and chemical equations percentage column type exactly the problem solving. The key to using the difference method is to find the theoretical difference correctly. [edit this section] [the applicable conditions] (1) the reaction is not complete or residue. In this case, the difference reflects the actual reaction, eliminating the effect of the unreactive material on the computation and making the calculation proceed smoothly. (2) there is a difference in the reaction before and after the reaction, and the difference is easy to find. This is the premise of using the difference method. It is only when the difference is easily obtained that the difference method is fast, otherwise the solution should be considered in other ways. [editing] [the use] A ~ B ~ Δ x B a - b C d A/c = (a - b)/d You know that a, b, and d can work out c is equal to a times d over a minus b. One of the meanings of the chemical equation: The chemical equation represents the ratio of the material before and after the reaction. This is the theoretical basis for the difference method. [edit] Lets say that the number between the micro and the macro is the same as k. A ~ B ~ Δ x B a - b A * k b * k (a minus b) * k A * k = a * (a - b) * k/(a - b) A/(a * k) = (a-b)/(a-b) * k) So you replace a times k with c, and you replace it with a minus b times k You know that a, b, and d can work out c is equal to a times d over a minus b. So this is the difference [editing this section] [princi