AutoCAD标准打印、快速打印和虚拟打印(国外英文资料).docVIP

AutoCAD标准打印、快速打印和虚拟打印 Standard printing, fast printing, and virtual printing There are three forms of CAD printing: standard printing, rapid printing and virtual printing. The standard printing is too complex for quick printing. 10.1 fast printing A quick print is to print the output directly from the model space, without the layout. Draw the picture frame first, determine the print range, the ratio of the frame to the drawing of the drawing, as A4 (210x297mm), A3 (420x297mm). The A4 is not big enough, so its 1:20. [file] [print], Printer: check [print device], HP (HP); Printing paper: [print setup], choose A4 paper, and there are many kinds of A4 paper, choose a standard size (ISO A4 210x297mm), Print direction: horizontal, Printing scale: 1mm = 200 units (1:20); Printing offset: center printing; Full preview. Print the style sheet to determine the color of the drawing, line width, line, etc., for example, to be black and white, not color. [file] [print], [print style sheet]. First name two Three new 4 to create a new print style sheet check to the current graphics using this printing style sheet and to cad 2004 former graphics and use this new graphic print style sheet (later can also be used) Print style sheet editor: select all colors, and choose black on the right (by default, use object color). If dont do this step 7, 8 color figure in black and white printer in a black out in depth is not 9 10 11 specification. Line width can only set the base line width, 12 because the line width is not 14 on the printer of different 13. Basic color, line width, linear, after setting up 15 to set up the special color, line width, linear axis line (such as wall as the thick line, point line of line). It is obvious why the map is divided into 16 colors. Preview, check and print out the diagram Tips: you can use the printed style only once, and you can use it many times. 10.2 standard printing The drawing is required to draw according to the actual dimensions. [start] [set