注塑制品翘曲变形的最显著影响因素.pdf

23 6 Vol.23, No.6 2009 6 CHINA PLASTICS June, 2009 1 2 曾亚森 , 谢小鹏 ( 1. , 528436; 2. , 510640) : Moldflow , /( V/ P ) , , , : V/ P , ; 4 4 , L9( 3 ), , , : ; ; ; + : T 320.66 2 : B : 1001-9278(2009)06-0069-05 Most Effective Factors Affecting Warpage of Injection Molded Parts 1 2 ZENG Ya-sen , XIE Xiao-peng ( 1. Department of Opto-electro-mechanical Engineering,Zhongshan Torch Polytechnic, Zhongshan 528436, China; 2.School of Mechanical and Automotive Engineering, South China University of T echnology, Guangzhou 510640, China) Abstract: Plastic injection molding was simulated using software Moldflow. Mold temperature, melt temperature, packing time, packing pressure, cooling time, injection time, and V/ P switch were taken as the affecting factors on the warpage of injection molding parts. In one-factor-at-a- time experiments, the order of influencing weight was: packing time cooling time melt tempera- ture injection time V/ P switch packing pressure mold temperature. T he first four were fur- 4 ther studied using T aguchi method in an L9( 3 ) orthogonal experiment. T he effect of the factors was measured by signa-l to-noise ratios (S/ N) for warpage, volumetric shrinkage, and sink index. T he result indicated that melt temperature was the most important factors for warpage. ey words: injection molding;warpage; Taguchi method;Moldflow analysis ,