YM31操作演示(英文版).pdfVIP

双盘研磨机 Double tube miller instrument 目 录 产品图片Instrument picture 产品介绍Instrument introduction 仪器规格Instrument pecifications 结构概述Architectural overview 维护保养Maintenance 安全防护Safety 服务优势Advantage service 产品图片 LT11A 产品介绍 � ASIDA –YM31 双盘研磨机，采用国外先进技术及零配件，操作简便、 舒适。该仪器主要用在PCB行业，用于控制与检验PCB质量所需的金相 分析系统微切片研磨、抛光，使微切片晶亮透明，更易于检验分析。 ASIDA-YM31 double tube miller, adopts advanced foreign technology and spare parts, which is easy and comfortable to operate. The instrument is mainly used in the PCB industry.It is used to mull and polish the micro slices of the metallographic analysis system,in order to make slices bright and transparent for further analysis. � 1.1 双盘设计，双盘双控，研磨安全简便，不需频繁更换砂纸。 Double miller design, double miller and double controller, safe and easy grinding, without frequent replacement of sandpaper. � 1.2 Precision rotary balance. 精密的回转平衡度 。 � 1.3 稳固的机身设计，使用时机身不摇晃，低噪音。 Solid body design, without body shaking, low noise during working. � 1.4 数字显示，无级调速。Digital display, variable speed. 仪器规格 结构概述 (1) 研磨機體 Grinding body (2) 擋水圈Retaining ring (3) 磨盤、磨盤壓圈 Disc, disc clamping ring (4) 噴水調節閥 Water control valv (5) 調速旋鈕Speed control knob (6) 電源開關Power switch (7) 速度顯示屏Speed displaye 结构概述 维护保养 � 1. 每日用湿布清洁本机所有表面。 Use a wet cloth to clean all surfaces of the instrument daily. � 2. 每次用完后需清洗积水盘内的污渍，并用急水冲洗排水管 防止沉淀物堵塞排水管。 Wash water stains tray and water pipes after each use to prevent a