vSphere ESXi敕令行应用方法详解(国外英文资料).doc

vSphere ESXi命令行使用方法详解(国外英文资料) The vSphere ESXi command line uses the method detailed Netsense network monitoring software to monitor and control the staff employees online computer use, prohibit employees from playing online games, limit the employee stocks, shielding employees watching videos, details of the...... Beijing, gather, live, net, pipe This article describes the configuration of the host using the vSphere ESXi command line method, independent of the servers free license and script pre configuration, before the server specifies the management of the vCenter server. Activate the interface of the vSphere ESXi command line As in ESXi 3, the command line interface (CLI:Command-Line Interface) is also unavailable unless you know how to activate and access CLI. The ESXi default configuration starts at the vmkernel interface. The F2 and F12 options allow for basic network and system event configuration, but are not allowed to do anything. Using the Alt-F1, enter unsupported, and then click enter, you can activate the local console prompt. Then you need to enter the root code, and then you can access the local console interface of the ESXi host. Now you can remote access controller HP, Integrated Lights-Out or Dells (DRAC:Dell Remote Access Controller) Shell security tools to run the command management interface and so on or activation of host ESXi (SSH), click on the link below can be obtained on how to activate the ESXi host SHH details. Configure the virtual switches using the esxcfg-vswitch command of the vSphere ESXi command line The basic function of this command is compatible with the vSphere ESXi command line (this is good). So many in the past for the vSphere ESXi command line written to create a standard virtual switch script in the two class work platform can run well, especially to perform an in place upgrade words in the same physical hardware, more is necessary for this function. However, this command has many new parameters, and a significant numb