wan与lan口的差别(国外英文资料).doc

wan与lan口的区别(国外英文资料) Now the average family uses the ADSL telephone line, the Internet is more, and there are usually several computers in the home, so how to make several computers online at the same time? This is going to use broadband routers, in general, broadband routers have several cable sockets above, some of these network sockets are marked with WAN, and some net mouth marked LAN, in the end what does that mean? What difference does it make? Go on, please. First, the difference between WAN port and LAN port on Broadband Router WAN is written in English Wide Area Network initials, that is, Wan, while LAN is written by Local Area Network, that is, local network (or LAN). ??? from their name on the US is not difficult to see, WAN is mainly used to connect the external network, such as ADSL, DDN, Ethernet and other access lines; and the LAN port connected to the home network, the home network is connected with the main switch, hub or PC. It can be said that these two types of networks are foreign and domestic. Two. The connection method of WAN port and LAN port on Broadband Router ??? first, access to cable network operators to provide inserted in the WAN port, and then a few Internet sharing computer to the LAN port, and then used a computer to log in the router management interface is configured to complete share online. (detailed configuration, please refer to the relevant router manual) Three. The transmission process of network data at WAN port and LAN port When a machine in a home network sends packets to an external network, it first sends a request to the default gateway, that is, to send it to a broadband router. When the router analyzes the network IP address in the packet, it checks the NAT address translation table of the device itself. After finding the appropriate entry, the WAN port IP address is used to communicate with the external network. When an external network receives a packet, it parses the WAN port IP address of the router in the packet