交换综合练习(自己留的)(判对错已改正)(复习用)(国外英文资料).doc

交换综合练习(自己留的)(判对错已改正)(复习用)(国外英文资料) Modern switching technology Comprehensive exercise book School of continuing education, Nanjing University of Posts and Telecommunications Fill in the blanks 1, when the user information is long, the communication mode adopted is efficient; otherwise, the use of the communication method is high The right way. 2, Chinas No. 7 signaling network mainly based on the way, the proportion of less. 3. The function of the user level of the switch; the concentration is greater than that of the switch. 4, frame relay is used to provide connection oriented service to users. 5, the fixed length of the short packet determines the ATM system is particularly suited and. 6, the data link layer of the IEEE802 reference model is divided into sub layers and sub layers. 7, TCP used in the case of primary transport messages, UDP used in the case of primary transport messages. In the 11 and OSI models, the physical layer protocol specifies the interface standards between and or between communication devices. 12 、 the signaling network can be divided into two classes according to the topological structure of the network. 13, in the digital subscriber interface of the switch, the main function of the transceiver is realized Transmission. 14, frame relay network, usually as a user, is responsible for the formation of frame relay format. 15 and ATM are multiplexed by statistics, multiplexed in time. 16, the IEEE802 reference model defines only the functions of the layers and layers. 17, the core of TCP/IP is the IP protocol, and the IP protocol provides the transfer capability between hosts. 18, the IP telephony gateway can be broken down into. 19, in order to support real-time telephony services, IETF defines RTP support and defines RSVP as a call reservation. 20 and ATM switches are devices that use layer switching technology, and traditional telephone switches are based on the first Layer switching equipment. 21, there are two types of connections for conn