可靠性测试标准(国外英文资料).docVIP

可靠性测试标准(国外英文资料) Test requirements for silk screen and fuel injection products 1 Purpose Instruct the inspector to conduct the reliability test correctly to ensure that our products meet the quality requirements of our customers. 2 scope of application Applicable to all of the companys silk screen, fuel injection processing products reliability test. 3 definitions 3.1. reliability: the environmental simulation test of the product under specified conditions, and its quality characteristics and endurance performance meet the specified requirements. The 3.2. test cycle, that is, in the round trip test, go round and round once for one test cycle. 3.3. individual test: when each product has a number of test requirements, each component only completes one of the tests. 3.4. multiple tests: when each product has a number of test requirements, each component has to complete 2 or more test items. 4 responsibilities The inspector shall follow this instruction to ensure that the product meets the quality requirements of the customer. 5 job steps 5.1, screen printing, injection reliability test (including products without clear test requirements) 5.1.1 testing materials and tools 5.1.1.1 78% concentration of alcohol, 5.1.1.2 95% concentration of alcohol, 5.1.1.3, 200g hammer 5.1.1.4 coarse textured clean calico 5.1.1.5 3M 600 test tape 5.1.1.6 boundary knife 5.1.1.7 constant temperature and humidity furnace, 5.1.1.8 RCA tape test machine, 5.1.1.9 test special paper tape 5.1.1.10 hot melt adhesive 5.1.1.11 pliers 5.1.2 alcohol test (each test 1 - 2PCS) 5.1.2.1 put the clean white cloth wrapped in coarse grain 200g hammer, wrapped with 95% alcohol infiltration, then the infiltration after the hammer in the screen printing button on the level of moving back and forth friction, stroke 30mm, frequency of 20 cycles / min (40 times), the continuous friction 50 cycles (100 times), (printing button with 95% concentration alcohol test). Other materials outside the 5.1.2.2 button are teste