地浸砂岩型铀矿音频大地电磁测量规范(国外英文资料).docVIP

地浸砂岩型铀矿音频大地电磁测量规范(国外英文资料) Specification for acoustic magnetotelluric measurements of EJ/T 1196-2005 in-situ leachable sandstone type uranium deposits Specification for acoustic magnetotelluric measurements of in-situ leachable sandstone type uranium deposits 1 range This standard specifies the purpose, tasks, methods, techniques, data processing and interpretation of the magnetotelluric sounding for in-situ leachable sandstone type uranium deposits. This standard applies to both land sourced sandstone derived uranium mine, natural source and mixed source audio magnetotelluric measurements. The magnetotelluric sounding can be used for reference in the field of coal, hydrology, engineering and environmental geology. 2 objectives, tasks and application conditions 2.1, purpose, task Detection? Sedimentary basin in caprock sandstone (sand) spatial distribution, thickness and depth of inference; basin basement undulation shape, distribution, size and depth; characteristics of inferred faults, provide the basis for the arrangement of exploration engineering. 2.2 application conditions Application conditions are as follows: (a) there are obvious and stable electrical marker beds in the survey area. The formation has enough thickness and remarkable electrical difference; (b) the electromagnetic interference in the measurement area is relatively calm or restrained, and various human disturbances are not serious or recognizable. 3 preliminary preparation 3.1 data collection The system should collect geological data, geophysical (physical property data), geochemical data and mapping data (including topographic maps, triangulation data, etc.), and focus on the collection of borehole data and electrical logging data. 3.2 field reconnaissance ??? field reconnaissance should understand the construction conditions (topography, transportation, residential distribution, climate), interference source investigation has influence on measurement. 3.3 model test ??? by using the petrophysi