塔式起重机拆装工法(国外英文资料).docVIP

  • 11
  • 0
  • 约1.3万字
  • 约 23页
  • 2017-06-08 发布于河南
  • 举报
塔式起重机拆装工法(国外英文资料)

塔式起重机拆装工法(国外英文资料) Tower crane dismantling construction method (ZJ1GF - 024-95) ? 1, 1,? Features and benefits This method has the advantages and advantages of various aspects such as table 1. Table 1 content project Pair ratio security Reduce the risk of construction; Reduce the number of high-altitude operations twice. The quality of Reduce the structure loss of the tower itself. construction Reduce the difficulty of operation, make it more reasonable and simple. Construction efficiency The construction period is three and a half times higher, and the construction day is twice as low. Economic benefits The cost is down by half. The intensity of labor Reduce the double ? 2, 2,? Scope of application The large arm of the tq60/80 tower crane is hoisted with 25m and 30 meters, and the lifting torque is 60tm ~ 80tm, lifting For 5t, the pressure is 30t. 2.2 E6026, F02BB and other small cars such as tower crane, arm length and high visibility of tower. ? 3, 3,? Technical process and construction points Construction sequence (in case of installation) Laid the ballast, the sleeper, the steel rail, the installation main passive stage car, the installation door frame and the base, put the pressure heavy, the assemble, the installation tower Body and the cap to install actuating arm, jib and join the corresponding device - connecting tower crane electrical part - jack-up tower crane (car luffing tower crane) to debug, test run to consign is used (note: the removal and installation sequence are basically the opposite) Construction points (in case of installation) Note: the main points of this article shall be strictly followed by the provisions and requirements of the state standards, regulations and the specifications of the tower itself. Install main, passive stage car Operation method: First, the line should be set in the position of the rail, followed by 300 by 250 by 1500 sleeper On both sides of the steel rail, the position of the trolley is placed in the position of a fix

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档