若何选择射频测试仪器(国外英文资料).docVIP

如何选择射频测试仪器(国外英文资料) Jia trillion technology CORAD How to select an rf test instrument Jia trillion technology Currently, the number of wireless communications products based on rf principles is staggering. From cellular phones and wireless P D A, to support WiFi laptop, bluetooth headset, radio frequency identification tags and Zigbee sensor, wireless medical equipment, radio frequency equipment market scale expanding at A rapid pace. To make comprehensive production tests and improve test capacity, the test engineers must be able to do the testing with the most appropriate instruments. So, how to choose the radio frequency test instrument? Choice of radio frequency signal source All rf signal sources can produce continuous (CW) radio frequency sine waves. Some signal generator can produce analog radio frequency modulation signal (e.g., AM signals or pulse radio frequency), the vector signal generator using IQ modulator to produce a variety of analog or digital modulation signals. Radio frequency signal source can be further divided into many kinds of, including the CW fixed frequency sine wave output source, scanning output a spectrum of fixed frequency sweep of the CW sine wave source, analog signal generator, and increase the analog and digital modulation function of vector signal generator. If the test requires an incentive signal, the rf signal source is required. The key indicators of rf signals are frequency and amplitude range, amplitude accuracy and modulation quality (for the source of the signal that produces the modulation signal). Frequency tuning speed and amplitude stabilization time are also critical for reducing test time. A vector signal generator is a high performance source, usually combining with any waveform generator to produce certain modulation signals. Any type of analog or digital modulation signal can be generated by any waveform generator. This type of generator can produce multiple base band waveforms internally, in some cases, as well