【2017年整理】03-CSJ-嵌入式-毕业设计说明书.docVIP

毕业设计说明书 基于ARM的室内外温度探测仪 学生姓名： 学号： 学 院： 专 业： 指导教师： 2014 年 6 月 基于ARM的室内外温度探测仪 摘要 本课题通过对Tiny6410开发板、LM75A温度传感器的学习和研究，利用ARM微处理器作为主控CPU，辅以单独的数据采集模块采集数据，实现了智能化的温度数据采集、传输、处理与显示等功能，从而构成室内外温度探测仪。在该系统中，温度采集模块对温度进行实时采集；驱动程序模块将数据从传感器中读出并传到应用程序中，数据显示模块将读取的数据显示到终端上，能将读取的数据以柱状图和曲线图的形式显示，并能读取到曲线上的每个点的温度值；设置温度的上下警戒值，当超过警戒值时，进行报警。 通过本课题的研究，希望解决室内外温度探测不准确的现实问题，通过曲线图的显示预测温度值，为温度控制提供基础，以便解决我国在温度测量控制中存在着装备配套能力差，产业化程度低，环境控制水平落后，软硬件资源不能共享和可靠性差等缺点，从而有利于我国在实现自动化的基础上向着完全自动化、无人化的方向发展。 关键词：ARM，温度传感器，Tiny6410，LM75AIndoor and Outdoor Temperature Detector Based On ARM Abstract Through the learning and researching of the Tiny6410 development board, LM75A temperature sensor, This topic uses the ARM microprocessor as the main CPU supplemented by a separate data acquisition module to collect data, and implements the intelligent temperature data collection, transmission, processing and display functions, which constitute the indoor and outdoor temperature detector. In the system, temperature acquisition module collect data in real time; Driver module reads data from the sensors and transmits the data to the upper application; The data display module displays the data on the terminal in the form of a bar chart and a curve graph, and can be able to read the temperature of each point on the curve; The system can set the upper and lower alarm temperature value. when collected temperature is more than the upper or less than the lower, the alarm is triggered. This topic hopes to solve the practical problem of indoor and outdoor temperature detection inaccurate. The temperature can be predicted through the curve graph, which could provide basis for temperature control in order to solve the disadvantages that our country exists in temperature measuring control such as the poor equipment supporting ability, low degree of industrialization, low level of environment control, and the fact tha