【2017年整理】2、变电站的电气主接线.ppt

母线设备隔离开关配单接地刀闸。 每段母线根据长度配置1~2独立的接地刀闸，以保证母线及电器的检修安全。 出线间隔断路器两侧隔离开关均配置接地刀闸，其中：母线侧为单接地刀闸，线路侧为双接地刀闸。 母联间隔断路器两侧隔离开关配置单接地刀闸。 主变进线间隔断路器两侧隔离开关均配置接地刀闸，其中：母线侧为单接地刀闸，变压器侧为双接地刀闸。 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 每组主母线装设三相电压互感器，以满足测量、保护装置的要求。 出线的A相装设单相电压互感器，以监视和检测线路侧有无电压。 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 2.1 什么是电气主接线 变电站的电气主接线是表明变电站内的变压器、各电压等级的线路、无功补偿设备与电力系统连接，同时也表明在变电站内各种电气设备之间的连接方式。为了清晰和方便，通常将三相电路图描绘成单线图。 电气主接线的方式很多，如：单母线接线、双母线接线、桥形接线等。但实行标准化设计后，电气主接线的设计已大大简化。 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 110kV配电装置 主变压器 220kV配电装置 了解主接线图的图形符号 1、表示线路、变压器与系统的连接情况 2、表示变电站内各种电气设备之间的连接方式 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 下一页 断路器 隔离开关 电流互感器 电压互感器 避雷器 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 返 回 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 返 回 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 返 回 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 返 回 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. Evaluation only. Created with Aspose.Slides for .NET 3