【2017年整理】【测控技术与仪器专业毕业设计+文献综述+开题报告】便携式红外测温系统的设计.docVIP

（20_ _届） 本科毕业设计 便携式红外测温系统的设计 摘 要 温度测量技术的应用十分广泛，而且也是现代设备故障检测中非常重要的领域。但是随着社会的不断发展，在某些应用领域中，我们要求测量温度用的传感器不能与被测物体直接接触，这就需要设计一种非接触式的测温方式来满足这样的测温需求。本论文正是应上述实际需求而设计的红外测温系统。 本文介绍的是一个由单片机构成的红外温度测量系统，它采用STC89C51单片机和红外温度传感器及数码管等其他器件实现。详细介绍了该系统的构成和实现方式，给出了硬件原理图和软件的设计流程图。该系统主要由光学系统、、显示输出等部分组成。光学系统汇集其视场内目标的红外辐射能量，红外能量聚焦在上并转变为相应的电信号。单片机按照算法。Portable Infrared Temperature Measurement System Abstract The technology of temperature measurement is used widespread, and it also important in the modern equipment failure examination field. However, with the continuous development of society, in some application domains, we needn’t the sensor contact with the measured object which used in temperature measurement, this needs a kind of non-contact temperature measurement to satisfies the demand and the design of this infrared thermometer based on the demand. This article describes a single chip which is composed of infrared temperature measurement system that uses STC89C51 microcontroller and digital infrared temperature sensors and other devices to achieve. The paper introduces the composing and the method of that system in detail, and gives the hardware principle diagram and the design flow chart of the software. The system formed by the optical system, photoelectron detector,display and output partially. The optical system collects the infrared radiation energy of the object in its field of view, the infrared energy focusing on the instrument and transforms to the corresponding electrical signal. The STC89C51 MCU is used to start the temperature survey, data receive, count the value of the object temperature based on the arithmetic with in MCU and the result is displayed on LED. Infrared thermomter, it uses the blackbody radiation laws as the theories foundation, it is the outcome that the optical theories and micro-electronics learn a comprehensive development. Compared to the way of traditional temperature measurement, it has a series of merits, such as short in response time, non