销售合同管理解决方案doc.doc

销售合同管理解决方案 合同管理专家软件是针对各类销售型企业实现合同无纸化管理、合同动态监控的一个软件产品。为企业提供快捷有效的合同执行模式，对合同签定流程进行合理的定义，支持合同文本的原样保存并对合同的执行状态进行实时的监控，大大减轻了手工操作的难度。内置各类经济合同模板，合同法规的查询，使企业合同管理实现科学化、法制化的管理模式。 合同文稿管理 提供合同模板，将以前的WORD格式合同导入系统，将客户管理和项目管理融合到合同管理中，真正体现优化公司资源的目的。自动化的合同结算有效的公司的资金运营 典型客户列表 TCL集团公司 本溪钢铁集团 河南安彩集团 解放军3305工厂 深圳启祥商贸公司 江苏铁本钢铁有限公司 上海宏远物流图们公司 东莞联动机器有限公司 中山海粤汽车工业有限公司 安徽鑫达成套设备有限公司 北京乐金系统集成有限公司 山东昌乐世纪阳光纸业有限公司 the same direction of rotation 90 ° or 180 ° for; after each disc rotor when measuring position alignment of the two half coupling constant, should also be in terms of accuracy and consistency. Surface deviation measurement, must in every 180 degrees corresponding to the two radii are equal to each other in order to eliminate errors caused by movement of the rotor. Only a support bearing of the rotor, WA couplings, such as the use of temporary leave the Center, should pay attention to keep the rotor in the measuring process in the center of the bearing oil retaining the nest does not change. Steam oil block, there should be sufficient clearance between the rotor and, in rotors make sure rotor is not on the block or seal oil. At the time of measurement, connections are not allowed between two rotors, each in a free State. Not allowed in case of assembled sleeve, Center work on the toothed coupling. Coupling tool should have adequate stiffness, installation must be secure and reliable. Coupling Center using a dial indicator, the table should be put in prison and avoid touching, to ensure correct measurement. Coupling disc after a week to return to the original position, circumference of dial gauge reading should be able to go back to the original value. When measuring the clearance of end, into the feeler of the gap should not exceed four at a time, when the gap is too large, you can use the gasket with the feeler gauge measurement of gauge blocks or finishing. bearing surface, markup should be in accordance with the mounting support pads, and retest the thickness. Once the lifting