固定床反应器(国外英语资料).doc

固定床反应器(国外英语资料) Fixed bed reactor unit simulation training system Operating instructions Beijing Oriental Simulation Software Technology Co., Ltd. Two years, six years, October Catalog Process description 2 1. Process instructions 2 2, this unit complex control circuit explanation 2 3 equipment list 2 Two unit operation instructions for fixed bed reactors 3 1. Driving instructions 3 2. Normal operating procedures 4 3. Parking operation procedure 4 4. Interlock instructions 5 5 instrument and alarm list 6 Three. Accident setting list 7 Four 、 simulation interface 8 Attached: thinking questions 10 Process description 1, process description This process is the process of acetylene removal by catalytic hydrogenation. Acetylene is removed by isothermal hydrogenation reactor, coolant temperature control by the shell side in the reactor temperature. The main reaction is: NC2H22nH2? (C2H6) n, the reaction is exothermic reaction. Acetylene reacts with heat of about 34 million calories per gram of acetylene. When the temperature is above 66, the side reaction is: 2nC2H4 (C4H8) n, and the reaction is exothermic. The cooling medium is liquid butane, and the heat in the reactor is removed by butane evaporation, and butane steam is condensed by cooling water. The reaction material is divided into two parts, one is about -15 DEG C, and the other is C2 based hydrocarbon raw material. The feed quantity is controlled by flow controller FIC1425; the other is mixed gas of H2 and CH4, the temperature is about 10 DEG C, and the feed quantity is controlled by flow controller FIC1427. FIC1425 and FIC1427 ratio control, two shares of raw materials are mixed according to a certain proportion in the pipeline after the reaction of raw gas / gas heat exchanger (EH-423) preheating, followed by raw material preheater (EH-424) preheated to 38 degrees Celsius, into the fixed bed reactor (ER-424A/B). The preheating temperature is controlled by the temperature controller TIC1466 by regulating the flow