常见废塑料的区分方法(国外英语资料).doc

常见废塑料的区分方法(国外英语资料) Method of distinguishing common waste plastics LDPE (Chinese Name: low density polyethylene): Sensory: soft: white transparent, but transparent, often with adhesive tape and printed characters. (Note: tapes and printed words are unavoidable, but they must be controlled because they affect the price on the market) Combustion identification: burning flame yellow yellow blue; burning smokeless; paraffin smell; melting dripping; easy drawing. EVA (Chinese: poly - ethyl acetate): Sensory identification: soft surface, stretch tensile toughness is stronger than LDPE, feel sticky (but no glue surface); white transparent, high transparency, sense and feel and PVC film is very similar, should pay attention to distinguish. Combustion identification: when burning with LDPE, the smell of paraffin is slightly sour; the burning flame is yellow and blue; burning without smoke. Melt dripping, easy drawing. Note: This product is a kind of PE. The price is the same as that of LDPE. It can be used for regeneration and granulation. The quality requirements are the same as those of PE. PP (Ju Bing): Sensory identification: This product is white transparent, compared with LDPE, higher transparency, rubbing when there is sound. Combustion identification: when burning, the flame is yellow and blue, and the smell is like oil, melting and dripping. No black smoke when burning. PET film (polyurethane) Sensory identification: This product is white transparent, feel hard, rub when there is sound. The appearance is like PP. Combustion identification: black smoke when burning, flame jump fire phenomenon, the surface of the material after combustion black carbonization, fingers rub after burning black carbide, carbide powder. PVC film (PVC) Sensory identification: the appearance is extremely EVA but elastic. Combustion identification: burning black smoke, from the fire that is extinguished, the combustion surface is black, no melting, dripping phenomenon. Nylon copolymer (LDPE+ n