三种洗衣机(国外英文资料).docVIP

三种洗衣机(国外英文资料) Drum washing machine from the developed to today has 90 years of history, the principle of which basically do not have too big change, according to the clothing of the engagement can be divided into two kinds of models, one is from the front of the washing machine to open the door, the washing into the wash bucket, called front-loading platen washing machine, another is from the washing machine lid above the door, will be put into washing barrels of washing, washing washing machine of platen called overhead. So-called superposed platen washing machine, it is to point to in the front of the washing machine has a transparent window, can be easily turned on and off, clothes is in and out from here. The washing machine is able to observe the washing when working through a transparent window. Transparent window has good sealing, washing liquid does not leak. General models are equipped with electronic door lock on the door, by the computer program according to the situation of the program to determine whether to allow to open the door, inside the barrel washing liquid level height is higher than the transparent window along or the high-speed rotating bucket dehydration, electronic door lock has been locked, the user cant open the door. As a result of the superposed platen washing machine is located in the front door, the upper part of it can make full use of space, for washing machine without drying device, can be superimposed over the dryer. Also can design special support, place washing supplies and so on. For washing machine of platen overhead, because take mouth design on the top of the washing machine, so cant observe the washing, but leave out transparent glass window and a complex series of sealing structure. Compared with the above two kinds of roller washing machines, the front loading machine is more convenient and beautiful than the upper roller washing machine. The most part of the market is the front roller washing machine, which is designed f