三订交换电念头道理(国外英文资料).docVIP

三相交流电动机原理(国外英文资料) Principle: There are two types of alternating current motors: one, three phase asynchronous motors. Single phase ac motor. The first is in industry, and the second is in civilian electronics. The rotation principle of a three-phase asynchronous motor Three-phase asynchronous motor to spin the prerequisite is to have a rotating magnetic field, three-phase asynchronous motor stator winding is used to produce a rotating magnetic field. As we know, but that power facies phase difference is the voltage on the phase between 120 degrees, three of the three-phase asynchronous motor stator winding on the spatial orientation also sent 120 degrees, so, when during a stator winding into the three-phase power supply, the stator windings creates a rotating magnetic field, its process is shown in figure 1. There are four moments to describe the process of rotating magnetic fields. Every change of the current cycle, the rotation of the magnetic field in the space rotation, that is, the rotation velocity of the rotating field is synchronous with the change of the current. The rotational speed of the rotating field is: n = 60f/P, f is the power frequency, P is the magnetic pole of the magnetic field, and the unit of n is: revolutions per minute. According to the type we know, the speed of the motor and the pole number and the use of the frequency of the power supply, therefore, control of ac motor speed has two methods: 1, change the method of magnetic pole; 2, frequency conversion method. In the past, the first method was used, and now the variable frequency technology is used to realize the infinitely variable speed control of the ac motor. It is also found that the rotation of the rotating field is related to the phase sequence of the current in the winding. Phase sequence arrange A, B, C clockwise, magnetic field, clockwise if any two of the three power cord switch root, such as current bubbled into C phase windings, B C phase current into the B phase winding,