光纤测试参数和测试方法简介(国外英文资料).docVIP

光纤测试参数和测试方法简介(国外英文资料) Fiber optic cabling system after the installation is complete need testing link transmission characteristics, one of the main attenuation characteristics of several test project is a link, connectors, insertion loss and return loss, etc. This paper briefly introduces the measurement of the key physical parameters of the fiber wiring and the troubleshooting and maintenance in the network. The key physical parameters of a fiber optic link Attenuation: Attenuation is the decrease of light power in the optical fiber transmission. The calculation of the total attenuation of the fiber optic network: optical fiber LOSS (LOSS) is the ratio of the Power Power out of the optical fiber output to the Power Power in the optical fiber. The loss is proportional to the length of the optical fiber, so the total attenuation not only shows the optical fiber loss itself, but also the length of the fiber. Optical fiber loss factor (alpha) : to reflect the characteristics of fiber optic attenuation, we introduce the concept of optical fiber loss factor. Measurement of attenuation: because fiber optic connections to light sources and light power timing inevitably lead to additional losses. Therefore, you must set the test reference point for the test instrument (i.e. the setting of the zeros) in the field test. For test reference points for several kinds of methods, mainly based on the test link object to choose these methods, in a fiber optic cabling system, due to the length of the fiber itself is usually not long, so will pay more attention to the connector in test method and test jump line, way more important. Return loss, return loss, also known as return loss, it refers to the optical fiber connection, to the reflected light relative to the ratio of input light decibels, the greater the return loss is better, to reduce the reflection of light source and the influence of the system. The method of improving the backwave loss is that the method to improve the los