挖掘机弊病消除(国外英文资料).docVIP

挖掘机故障排除(国外英文资料) Abstract: the hydraulic system is one of the most important system of excavator, also is one of the most prone to fault system, this paper, taking PC200-5 type excavator hydraulic system as an example, tells the story of the hydraulic system working principle and failure diagnosis and elimination method, for the excavator and other contains hydraulic transmission equipment maintenance play a guiding role. Keywords: the troubleshooting of excavator hydraulic fault Excavator on the application of hydraulic transmission system mainly has the pilot control hydraulic system, rotary walking hydraulic system, hydraulic system, working device hydraulic system, etc., it has compact structure, flexible motion, smooth operation, the advantages of convenient operation, the hydraulic system in hydraulic oil as the transfer medium of power, will leak after wearing, because of the internal components at the same time accompanied by overheating, unable to work, etc. The emergence of the hydraulic transmission fault is sudden, concealment, and components is more involved, bring certain difficulty to failure diagnosis and elimination, so in the maintenance of the hydraulic system, must understand its working principle and correct based on the analysis of the cause of the problem to guarantee the quality of maintenance. In this paper, the principle of hydraulic transmission is introduced in this paper, and the diagnosis and elimination method of the common fault phenomena are analyzed. 1 pc200-5 excavator hydraulic system working principle PC200-5 type excavator hydraulic system is composed of some basic circuit and auxiliary circuit, they include working loop, pressure limiting circuit, unloading, buffer circuit, throttling control of motor speed and throttling speed loop, walking speed loop and the guide valve control circuit, etc. Its components work mainly by the pump, oil pump, pilot control valve, distributing valve, safety valve, the big arm oil cylinder, lower