挖掘机油耗(国外英文资料).docVIP

挖掘机油耗(国外英文资料) Excavator knowledge After engineering machinery factory, general provisions about 60 hours of period (some called the running-in period), it is production factory on the basis of engineering machinery use early skill features and rules. The grinding period is the main link to ensure the normal operation of the engineering machinery, decreasing the failure rate and extending its service life. But at present, some users because of a lack of engineering machinery use common sense or due to the tight, or want to reap the benefits as soon as possible, and neglect, new period of special technique request. Some users even thought, anyway, manufacturers have the repair period, the machine is broken by the manufacturer is responsible for the maintenance, the machine in the running-in period then use long time overload, resulting in failure of machine early more frequently, which not only affect the normal application of the machine, shorten the service life of the machine, but also because of the damage to the machine, affected the project progress. Therefore, the use of the construction machinery and the use of the summer should be highly valued. First, the characteristics of the period: Wear faster? Because the new machine parts processing, assembly and adjust, the influence of such factors as the friction surface is rough, cooperate with the surface contact area is lesser, uneven pressure on the surface of the state. Machine in the process of running, the concave and convex part chimeric friction each other on the surface of the parts, grinding of metal debris fell down, and as an abrasive, continued to participate in friction, accelerate the abrasion on the surface of the parts with more. Therefore, it is easy to wear the parts, especially the surface of the surface, in the grinding period. At this time, if overload operation, can cause the destruction of the component, occurrence early failure. Poor lubrication? As a result of the new assembly parts fit cl