水分仪使用(国外英文资料).docVIP

水分仪使用(国外英文资料) MS/MF/MX/ML rapid moisture tester One: use a fast sensitive Sensor called the Super Hybrid Sensor Fast sensitive SHS super composite weighing sensor. With a quick response speed, the stable time is only one second. The high resolution is 1/60000 and the internal resolution is 1/10,000,000. Is mainly used in high resolution and high accuracy in analytical balance, SHS application in the water meter is in order to get the test more quickly in the process of testing the moisture content of every second of the data. Two: the rapid uniform halogen lamp heater with innovative SRA secondary radiation auxiliary device. Using straight halogen lamp AND unique design of SRA secondary radiation assist device to shorten the measuring time, form the heater quickly. (SRA secondary radiation is auxiliary devices AND designed for MX/MF series moisture meter research AND development of new heating method. Through the place with glass tubes under the second reflection heat the samples to make uniform heat. Solved the old samples due to the heating plate in direct heating mode AND the distance of light caused by different sample error produced by the uneven heat problem.) After preheating heating as long as more than 40 seconds 50-180 degrees Celsius. Ordinary material testing for a few minutes to get accurate measurement results. (halogen light emitted from 95% in infrared wavelength range, its energy characteristics are basically the same as the infrared lamp. And there are heating up as infrared lamp superior speed and maintenance costs.) Three: 0.01% accuracy SHS rapid sensitive characteristics of weighing sensor, makes a very small amount of samples under high humidity measurement can be very precise. (minimum of 1 g, the limiting value is 0.10% / min) Four: the clear and easy to observe large screen VFD fluorescence display Use high clear fluorescent display to facilitate multi-angle observation and the use of factories and dark places. Measurements, set values, ch