浙江工业大学2009年(国外英文资料).docVIP

浙江工业大学2009年(国外英文资料) Zhejiang university of technology, 2009 Master of postgraduate entrance examination and examination outline Class name: (807) mechanical principles First, basic content The introduction (1) content The object and basic concept of mechanical principle The content of the course of mechanical principle and its status, mission and function in teaching The development trend of the discipline of mechanical principle 2 the basic requirements The subject and content of the course are clearly defined. To clarify the status, task and role of the course. The development trend of the subject is well known. The key points, the difficult points This chapter focuses on the object and content of this course. The nouns and concepts of parts, components, machinery, machinery, machinery, etc. Are well understood, and the characteristics and distinctions between machines and institutions are clear. For example: the difference between the parts and the components is that the parts are made by the machine and the component is the unit of motion of the machine, which should be mastered. Structure analysis of plane mechanism (1) content The purpose of the structure of research institutions Sports, sports, and institutions A simplified graphic of the plane The composition principle and structure analysis of the plane mechanism 2 the basic requirements It can calculate the degree of freedom of the plane motion chain and determine the condition of the motion. A simplified drawing of an organization. Can carry out the organization principle and the structure analysis. The key points, the difficult points What is a constraint? What is the relationship between the constraint number and the number of degrees of freedom? What is the degree of freedom of the lower pair (rotations and moving pairs) and the high pair with several constraints? F = EMBED Equation. Pay attention to the type of n to the number of artifacts rather than numeral, EMBED Equation. 2 for planar low number,