锅炉水质不良对工业锅炉造成的危害分析(国外英文资料).docVIP

锅炉水质不良对工业锅炉造成的危害分析(国外英文资料) Analysis of the hazard of boiler water quality to industrial boiler The consequence of the scale of the boiler A boiler is a heat exchange facility, which ACTS as a heat transfer when the fuel is burned to produce steam. If the water quality is bad, the water scale is formed on the hot surface, and the formation of the scale of the water will greatly affect the heat conductivity of the boiler. The thermal conductivity of the object is usually indicated by the thermal conductivity, and the greater the thermal conductivity, the greater the thermal conductivity. As you can see from the following table: The thermal conductivity of the scale is tens of times smaller than that of steel. As a result, there are several adverse consequences of boiler scaling: (1) waste fuel. When the boiler is fouled, the heat transfer performance of the heating surface is changed, and the fuel is wasted in order to keep the boilers rated parameters. (2) the heating surface was damaged. , the scale of the boiler heating surface temperature increase, on either side of the metal wall temperature is high, the strength is reduced, pressure inside the pot, happen bulge, even causes severe accident detonation tube. Reducing the output of the boiler. When the boiler is fouled, the formation of the scale will reduce the circulation section of the heat pipe and increase the flow resistance of the water circulation in the tube, and the severe person may even be completely blocked. This destroys the boilers normal water circulation, prevents heat transfer inside the boiler, and reduces the boilers evaporative capacity. As a result, the boiler force will be reduced corrosion The boilers economizer, water cooling wall, convection tube beam and boiler tube etc. Are corroded by bad water quality. As a result, the metal components are thinned and dented and even perforated. More severe corrosion can damage the structure of the metal. The corroded metal is significantly reduced. T