键盘和鼠标没反应如何办(国外英文资料).docVIP

键盘和鼠标没反应怎么办(国外英文资料) What about the keyboard and mouse? Most of the mouse problem is the mouse itself, which needs to be tested by another computer, first to eliminate the problem of the mouse itself. If its a system, fix the system. Once the F8 is switched on, it will be able to enter normal mode (repair the registration form) after exiting, selecting restart, or shutting down. System at 2, if the fault is still, please use the system restore, restore to you did not appear the fault repair (if failed restore normal mode, please press F8 boot into safe mode used in the system restore). 3, if the failure remains, use system disk repair, open a command prompt enter the SFC/SCANNOW carriage return (SFC and/have a space between), inserted into the original system disk repair system, the system will automatically repair. If the problem persists, set the optical drive in the BIOS to the first boot device insert system installation disk and select fix install. If the problem persists, it is recommended to reinstall the operating system. Another reason is the lack of USB power, which may be too much of a USB connection. It is recommended that you use an electrically charged USBHUB or use a USB switch to the PS / 2. There is also the possibility that Windows xp will turn on the power-saving mode by default, leaving the USB port with a lack of power, making the USB port intermittently dysfunctional. Right-click my computer/properties/hardware/device manager, double-click the universal serial bus controller to several USB Root Hub double-click any one, open the properties dialog box, switch to the power management TAB, remove allow the computer to turn off this device to save power in front of the check, click ok to return to, in turn each USB RootHub attribute changes after the restart the computer. The USB device can be stabilized, and the frequency is as low as possible. Common fault diagnosis method for photoelectric mouse Optical mouse failure mainly includes: (1) of the