Thinkpad t400 bios详细设置!（国外英文资料）.doc

Thinkpad t400 bios详细设置!（国外英文资料） BIOS, Basic Input and Output System, controls the setup of all computer hardware. When we turn on T60, the Press F1 for ThinkPad BIOS appears below the screen When Setup Utility, press the F1 key, enter the correct password or swipe the fingerprint (if the BIOS password is set), you will enter the BIOS Settings interface. In the ThinkPad BIOS Settings interface, there are two parts, including Config, Date/time, Security, Startup, Restart, HDD Diagnostics Program, etc The Settings option, the lower half of the system shows some system information for the native. One, the local system information Displays the content instance specification BIOS Version 1.06 (79ET61WW) machine current Version of the BIOS BIOS Date (year-month - Day) current BIOS release Date Embedded Controller Version 1.04 Embedded Controller Version (which must be used with the corresponding BIOS) The System - Unit Serial Number 2007AT3L3AP778 2007 is the Model, and the L3AP778 is the Serial Number of the fuselage System Board Serial Number VF09K6651NR Serial Number Config (configuration) To move the high brightness bar to the Config, press enter to enter the Config TAB. (1) Network 1, the Wake On Lan If you choose Enabled, you can turn on the laptop from other computers on the LAN and start the notebook. Disabled forbids it. (according to the need, the average individual user chooses Disabled.) 2, Flash Over a Lan Allows you to upgrade the native BIOS from a available LAN. Disabled forbids it. (according to the need, the average individual user chooses Disabled.) 3, Internal Network Option Rom Enabled: Enabled to update the Rom of the wired network through the network. The Disabled are prohibited. (the recommendation was Disabled, before the ThinkPad T60 user reported that the switch was turned on and off, due to an unexpected loss of power, which resulted in the damage to the network card Rom.) Hard Drive Direct Memory Access (DMA) Enabled: enable; Disabled, Disabled