ubuntu下编程步骤（国外英文资料）.doc

ubuntu下编程步骤（国外英文资料） What is the concrete step of writing a C program and debugging under ubuntu? Satisfied with the answer Install Gcc or do not install also open terminal: Im going to enter vi in and Im going to go in and edit the state, Enter your c program input and follow the ESC input command : w 123. C Ctrl + z to launch the vi Input to the terminal: GCC 123. C If the a.ut file is generated correctly Enter in the terminal: / a.ut will run your c! The basic operations of a vi ? Enter the vi After the system prompt enters vi and the file name, you can enter the vi full screen edit image: $vi testfile One thing to note is that you are in Command mode after you enter vi, and you have to switch to Insert mode to enter the text. First with vi key levels using mobile users will want to make the cursor, the results of computer has been called, gas yourself, so after entering the vi, dont touch, After the Insert is converted. ? Switch to the Insert mode edit file and press I, a or o three keys in Command mode to enter the Insert mode. Then you can start typing the text. I: insert the input text from where the cursor is currently located. A: increased. The next word in the cursor now begins to enter the text. O: insert a new line and enter the text from the beginning of the line. ? Insert switch to Command mode, press Esc key You are currently in the Insert mode and you can only keep typing. If you find the wrong word, you want to move it back with the cursor key and delete it. Press the ESC key to the Command mode and delete the text. ? Leave vi and save files In Command mode, you type in the Last line mode, for example: W filename (enter w filename, and store the article in the specified filename) : wq (input wq because the file name testfile has been specified since entering, so testfile will be written and left) : q! (input q!, force to leave and drop edit files) Command mode function key list After introducing the command mode command, the function keys with the wo