冷水机设备结构原理（国外英文资料）.doc

冷水机设备结构原理（国外英文资料） Cold water machine equipment Edit the entry Orders, record Working principle of the 1 2 system flow chart 3 parts structure 1, the compressor 2, condenser 3, evaporator Thermal expansion valve 5, and other auxiliary parts 4 model classification 5 USES application Working principle of the 1 The working principle of the chiller is vapour compression refrigeration, which is the principle of heat absorption when the liquid refrigerant is vaporized. In refrigeration, evaporation refers to the process of turning a liquid refrigerant into a gas phase when it is boiling. Liquid into gas has to absorb heat from the outside world to realize, so is endothermic process, the vaporization of liquid refrigerant evaporation temperature is called evaporation temperature, condensation is refers to the steam cooling to equal to or below the saturation temperature, make the steam into the liquid. System flow chart Figure 1-air cold water chiller principle flow chart Figure 2 - water cooled chiller system flow chart (figure 1 - air-cooled chiller is make use of shell and tube evaporator water heat exchange with the refrigerant, refrigerant system in the absorption of heat load in the water, the water cooling of the cold water, through the role of the compressor and heat to the fin condenser, and then, by a cooling fan is lost to the outside world of air (wind cooling); figure 2 - water cooled chiller is the use of shell and tube evaporator water heat exchange with the refrigerant, refrigerant system in the absorption of heat load in the water, the water cooling, through the role of the compressor after cold water will heat generated to shell and tube condenser, the refrigerant absorbs heat to heat water, make water through the pipe after the cooling tower will be out of the external heat loss (water cooling)) as shown in figure, at the beginning by the compressor suction evaporative cooling after low temperature low pressure refrigerant gas, then compressed into high t