华为配置大全（国外英文资料）.doc

华为配置大全（国外英文资料） ~ ~ ~ ~ ~ PCA login: root; Using the root user Password: Linux; The password is Linux # shutdown - h now. To turn it off # init 0; To turn it off # logout; The user logged off # login; The user login # ifconfig; Show the IP address # ifconfig eth0 IP address netmask Set the IP address # ifconfig eht0 IP address netmask. Disable IP address # route add gw Set the gateway # route del. Delete the gateway # route add default gw Set the gateway # route del default gw IP ; Delete the gateway # the route; According to the gateway IP # ping ; Send the ECHO package IP # Telnet ; Remote login -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- The switch command ~ ~ ~ ~ ~ [Quidway] Display current configuration [Quidway] display current - configuration; Display current configuration [Quidway] display interfaces; Display interface information [Quidway] display vlan all; Display routing information [Quidway] display version; Display version information [Quidway] Modify the privileges user password [Quidway] sysname; Switches named [Quidway] interface Ethernet 0/1; Go to the interface view [Quidway] interface vlan x; Go to the interface view [quidway-vlan-interfacex] IP address 255.0.0; Configure the IP address of the VLAN [Quidway] IP route - static ...........0.0.0. Static routing = gateway [Quidway] rip; Three-tier exchange support [Quidway] local - user FTP [Quidway] user interface vty 0, 4; Enter virtual terminal [S3026 - ui-vty0-4] authentication - mode password; Set password mode [S3026 - ui-vty0-4] set authentication - mode password simple 222; Set the password [S3026 - ui-vty0-4] user privilege level 3; User level [Quidway] interface Ethernet 0/1; Enter port mode [Quidway] int e0/1; Enter port mode [quidway-ethernet0/1] C