各种端子介绍大全（国外英文资料）.doc

各种端子介绍大全（国外英文资料） Analog audio terminal RCA This is by far the most common kind of audio/video terminals, the double connection terminal early age in the radio was invented by RCA audio company, there is also a more old-fashioned, also more strange name is called turntable connector. RCA terminal with the method of coaxial transmission signal, axis used to transmit signal, the outer ring of contact layer is used to ground, can also be used to transmit analog video and digital audio signals. RCA audio terminals are typically colored in pairs in different colors: the right sound is red (the letter R means right or red); The left channel is black or white. Sometimes, and around a track in the cable will use other color mark to distinguish when convenient wiring, but everything in the whole system of RCA connectors on the electrical properties are the same. Generally speaking, the RCA stereo audio line is a set of left and right sound tracks, and each sound is a line. XLR balanced terminal This is a three-wire terminal, and the three wires are positive, negative and shielding. XLR is called the balance terminal and microphone plug, generally used in the field of professional or radio and television, but in some Hi - End equipment has also been used in level of consumption, between the preamp and the amplifier for signal transmission. In connection, the three-wire XLR plug outputs the audio signal, while the three-wire jack enters the audio signal. XLR terminal balance the advantage of linear transmission signal, so that can transmit the audio signal in long distance greatly reduced the electromagnetic and electronic systems work radio frequency interference and noise in the audio signal and hum. However, the advantage of XLR transmission in general consumer appliances is not obvious. Phone/mini-phone terminal Standard of 1/4 inch (6.35 mm) of the diameter of the headphones plug and socket design from early telephone wiring board, the terminals on the AV equipment is gene