数字电子（国外英文资料）.doc

数字电子（国外英文资料） Center for digital electronic technology, zhongnan university information institute Exam question (110 minutes) (first set) 1, fill in the blanks: (1 point, 15 points) 1. The two standard forms of logic function () (), respectively. The result of 1 in 2004 is (). 3. The structure of the semiconductor memory mainly contains three parts, respectively is () () (). 4.8 bit D/A converters when the number isto 5v. If only the lowest level is high level, the output voltage is () v; When the input is the output voltage is () v. 5. Successive approximation model and double integral type two kinds of A/D converter, (), strong anti-jamming capability, () the transformation of the speed. In the three circuits of the 555 timer, () and () are the shaping circuits of the pulse. 7. Compared with PAL, GAL device has a programmable output structure, it is through the study of the programming to set the () of () to the working mode of implementation, and with (the) process structures, can repeat programming, make its versatility is good, use more convenient and flexible. Two, according to the requirements: (15 points) The logical function, P = AB + AC, is written as either an expression or a non-form expression, and a collector opens the door. The circuit is composed of the CMOS gate circuit, the expression of P and Q, and the P and Q waveforms corresponding to A, B, C. The circuit of F1 and F2 is presented in this paper, and the logic function of the circuit is explained. The device used in the diagram is 8 choose 1 data selector 74LS151. (10) Four, design a decimal number four round to the circuit (adopt 8421BCD code). Only one output is set, and the logical circuit diagram for the simplest and non-gate implementation is drawn. (15 points) 5, the waveform of the known circuit and CP and A is shown in figure 5 (A) (b). The initial state of the trigger is 0, and the waveform of the output terminal b and C is drawn. (8) B C The form of a circuit, which