汉匀超级充电器最新说明书（国外英文资料）.doc

汉匀超级充电器最新说明书（国外英文资料） Hc02 series super charger (HYC02 basic/HYC02A high-pressure save/HYC02ALP) The instructions Thank you for using the two generation supercharger. Han and the second generation super charger, is a powerful function and excellent performance of the electric car chargers, two industrial control with single chip microcomputer was used to construct a stable core processing circuit, high reliability, strong control ability. Features: Digital display and twist, to realize man-machine dialogue. Compatible 36/48/60/64/72v battery pack (which can be automatically run after 36V and 48V identification). 3, compatible with 5-30ah different capacity of battery Maximum transition voltage can be set The transition current can be set The high pressure limit can be set The whole time limit can be set The powerful pulse during the float is no damage to the sulfur Special two high voltage small current is not damaged to be balanced Fill in the capacity query Current temperature query Current battery capacity percentage query (2ALP cancels the query) 13, lithium electricity compatible Reasonable cooling fan control mode Display value fine-tuning (in engineering mode) Long extension compensation (need to enter engineering mode) Display and action interface: Display: The first row digital tube displays the charger output voltage. The second row of digital tubes, after they are turned on, will calculate the battery voltage rating according to the display voltage. When the charging starts, the current charging current is displayed. Button: The four buttons from left to right are query, rank (+), start (-) and set. Query: the query button, after the first row of the fourth digital tube will show A, b, 0, digital tube corresponding to the second row shows has been filling the electricity, temperature inside the machine, battery percentage. Grade (+) : before charging, press this button to change the battery level. The second row will display the corresponding voltage level