感光胶的分类介绍（国外英文资料）.doc

感光胶的分类介绍（国外英文资料） Description of sensitive adhesive (upper) Photoreceptors can be divided into two types: solvent and water-resistant. Solvent sensitive adhesive with all kinds of organic solvents, suitable for printing of oily ink. Waterproof photosensitive adhesive, which is suitable for printing of water-based ink (water-soluble printing paint, such as printing paste of textile). The latter usually cannot be recovered from the film. Special water-resistant photoreceptors are nylon photoreceptors and heavy nitrogen photoreceptors. The user must select the appropriate photoreceptors according to the relevant instruction manual. The photoreceptor is a kind of photosensitive material for direct legal edition, and can be divided into single fluid and double fluid. Single liquid photoreceptors have been added to latex in the production time, without the need to make up the coating when used. The two liquid photoreceptors will be used to explain the solution before using it and then disperse it in the latex. Sensitive glue types, wide variety, manufacturers have taken different formula, choose according to the request of substrates, when referring to the product specifications appropriate choice. 1. Dichromate sensitive adhesive. Such photoreceptors are bichromate, which is a membrane of water-soluble polymers such as gelatin, PVA and PVAC + PVA. Such photoreceptors can be made on their own, and the typical recipe is as follows: The formulation of gelatin sensitive adhesive Gelatin 16g Citric acid 0.5 g Ammonium dichromate 4.5 grams Ammonia 3ml Water 70ml The source of this adhesive is convenient, cheap and easy to develop. But the gel is easy to freeze, the coating is not strong, the wet strength is poor, the clarity is poor, and the day will be brittle. So gradually the synthesis of polymer materials is replaced. PVA sensitive adhesive formulation A liquid: PVA (1788) 50g Sodium lauryl sulfonate 0.5 g Water 400ml B: ammonium dichromate 6g Water 50ml Sodium lauryl sulfo