汽车零件英语（国外英文资料）.doc

汽车零件英语（国外英文资料） Seat reference point: seating reference point (SgRP) High seat: the seat height Seat adjuster: seat adjuster Seat adjustment motor: seat adjustment motor Seat adjustment: seat adjustment cntrol Seat plate Load sensor: SPLC Seat - Pan Load Cell Seat belt: seatbelt Height from seat to roof Amount of static cushioning Coordinate System: Coordinate System Maximum allowable static load on the mounting device: the maximum authorized static load on coupling device Maximum design static load on the mounting device: maximum design static laod on coupling device Actuation gear Invalid: invalidated the notes Make a pull rod: actuating link Turn Left to Signal: LSIG Left - Turn - Signal Move the limited type of multi-contact Joint: GE Glaenzer External Joint Left -- Right: l-r Left - Right Left hand, Left: LH Left hand Left Front turn state: LFST left-front -steeringl - Status Left Front Motor Direction: LFMD left-front - - Direction Left forward Motor Current: LFMC left-front - motor-current Left Front Current Feedback: LFCF left-front - Current - Feedback Left forward Solenoid valve state: LFSS Left - Front - Solenoid - Status Keep Feedback in Front of Left: LFHF left-front Hold - Feedback Left Front Hold: LFHL Left - Front - Hold Left nozzle Fault: LINF Left - Injector - Fault Left the Door: LDOR Left - feel Left pulse width regulator Valve: LFPW Left - pwm-valve Left Integrator: INTL Left - Integrator After the Left: LR Left Rear Left oxygen sensor Voltage: O2 - L Left - O2 - Voltage Left Injector Pulse Width: IPWL Left - Injector - Pulse Width Left hand drive: left-hand drive Left engine: left-hand engine Left: the left Minimum turning diameter test: minimum turning diameter test Minimum design shaft: minimum authorized load Best Injection Timing: BIT Best Injection Timing Optimal economy: optimal economy Best Power: BP Best Power Chief executive office: observer Chief executive officer: chief executive officer The highest continuous combustion speed: maximu