系统stop 出错代码解说（国外英文资料）.doc

系统stop 出错代码解说（国外英文资料） There must be code after the stop error. Which is your code? Stop the error number: 0x0000000A Note: IRQL - NOT -less - EQUAL Common cause: the driver USES an incorrect memory address. Solution: if you cannot login, then restart the computer. When there is a list of available system, press the F8 key. In Windows advanced options menu on the screen, choose last known good configuration, then press the return key. Check all the new hardware or software is properly installed. If this is a new installation, please contact the hardware or software manufacturer, for any Windows updates may need or driver. Run all system diagnostics software provided by computer manufacturers, especially memory checks. Disable or unload newly installed hardware (RAM, adapter, hard disk, modem, etc.), driver or software. Make sure that the hardware device driver and the system BIOS are the latest versions. Make sure the manufacturer can help you with the latest version and also help you get the hardware. Disable BIOS memory options, such as cache or shadow. -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Stop the error number: 0x0000001E Caption: KMODE - EXPTION - NOT - HANDLED The usual reason: the kernel mode process attempts to execute an illegal or unknown processor directive. Solution: make sure there is enough room, especially when a new installation is performed. If a stop error message pointed out that a particular driver, then disable him. If you cannot start the computer. Try to use safe mode to start, in order to remove or disable the drivers. If you have a non-microsoft video driver, try to switch to the standard VGA driver or the appropriate driver provided by Windows. Disable all newly installed drivers. Make sure you have the latest version of the system BIOS. The hardware manufactur