海康威视常见问题（国外英文资料）.doc

海康威视常见问题（国外英文资料） Hai conway sees a series of hard disk VCR How to use remote control? Aim at the DVR panel and operate on the remote control A, press equipment B, input device number 88 (the default device number is 88, which can be modified locally on the main menu) C, press the confirmation key If the remote control is configured successfully, the status light on the front panel of the VCR is turned green. Press the device key again and stop the remote control. Once the DVR is recharged, the remote needs to be reconfigured for use. Why is it that the new machine will have a di - di - di sound when it is turned on? The reason: 1: the machine doesnt have a hard drive; 2: the machine has a hard drive but no formatting; 3: the hard disk. Clear method: 1: if you dont need a hard drive, please go to the main menu - exception handling. 2: if you have a hard drive, go to the main menu - management tool - hard disk management and format your hard drive. 3: still not solved, may be hard disk, please change the hard disk. How to set up 7 x 24 hours automatic video? Enter the main menu - video Settings, select the video channel, and square root after the video is opened. Enter Settings and set the video type to be timed after the full day video option. The copy should be copied from Monday to Monday, and then click copy to confirm the success of the copy. Click ok to save Settings and exit Settings to the video Settings interface. In the video Settings interface, copy the channel video Settings to other channels. Click ok to determine the save Settings. How to set video parameters and how to calculate the video file size? Commonly used video parameter sets flow type, resolution, video frame rate, bit rate upper limit and bit rate type, use according to the equipment function in support of the selected code flow type and the resolution of the right (see the comparison of all kinds of); The video frame rate is generally full frame rate; Bit rate types are: Constant stream: comp