手把手教你：如何建立自己的网络电台（国外英文资料）.doc

手把手教你：如何建立自己的网络电台（国外英文资料） preparation Hardware: a cpus with a strong floating point operation (AthlonXP or Pentium 4); A piece of good Sound CARDS (low CPU occupiers, such as innovation Live! And the Audigy series); Good uplink bandwidth (at least ISDN, which can handle 2 ~ 3 listeners) A microphone (an addiction to a DJ). Of course, this is just a recommended configuration, a low point. Software: Windows Media encoder 9.0: resource footprint, low bitrate, sound quality, easy to learn and free; Numerous digital audio format files: MP3, MPC, WMA, APE, WAV or CD, even VCD, DVD, etc. Setup of the encoder Start the Windows Media encoder (download: /softdown/38826.htm), and the software will automatically pop up the wizard and select the default broadcast live event. Then select a sound card with a sound recording quality as audio device, if only one board is loaded with AC 97, choose the default. Since then, the choice has been to choose the server that is being broadcast, the PC that is currently being used, or the dedicated Windows Media server. I cant wait for DIYer to use his own computer. Select the button coder to pass the message. Windows Media encoder service port is port 8080 by default, but it is best not to use the default Settings, click the search available ports select a did not take up the current quotation, choose a relatively easy to remember Numbers. The encoding options are related to bandwidth and sound quality, but also to the use of system resources, which is critical. The system configuration is high enough to select the multicbit-rate encoding (CBR), which selects 135/70/54kbps for more bandwidth. If you are not going to record the recording, you should not save the broadcast to the file. Avoid unnecessary hard disk space. Note: the above Settings in the choice of the most important thing is to coding bit rate, if you still are not sure what encoding bitrate, should use a net friend to help you, please test is a good choice. The trumpet began to