在Linux上启动s.m.a.r.t.硬盘检测（国外英文资料）.doc

在Linux上启动s.m.a.r.t.硬盘检测（国外英文资料） Start S.M.A.R.T. on Linux systems -- -- -- -- -- -- -- -- How do you check the state of your hard disk on Linux -- -- -- -- -- -- -- -- S.M.A.R.T S.M.A.R.T. is called self-monitoring, Analysis and Reporting Technology. Self-examination, analysis and reporting techniques. The S.M.A.R.T technologys hard drive can be used to monitor the head and disk of the disk on the monitor instructions on the hard disk and the monitoring software on the host The operation of the motor, the circuit, the historical record and the preset safe value are analyzed and compared. When it comes to the outside of the safe range, It automatically alerts the user. Where is S.M.A.R.T? How to work? The S.M.A.R.T information is kept in the disks system reservation area, which is typically located in the front of the hard disk 0 physical Dozens of physical tracks are written by the manufacturer to the internal manager. In addition to the S.M.A.R.T information table, there are also low-level formatting programs and encryption decryption Programs, self-monitoring programs, automatic repair programs, etc. The monitoring software USES a command called smart return status (command code: B0h) The S.M.A.R.T information is read and the end user is not allowed to make changes to the information. -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - S.M.A.R.T technology in the SCSI system The S.M.A.R.T technology supports SCSI \ ATA series products, but there are some differences in some parameter Settings, SCSI biata on key parameters Hard drives are more complex. In practice, however, the S.M.A.R.T interferes with the ATA/IDE system than the SCSI system due to the user and the use of the environment More, and more professional and accurate in the case of SCSI failures. Here are some of the parameters that are unique to the SCSI hard drive -- -- -- -- -- -- -- --