中兴透明通道各命令使用操作指南（国外英文资料）.doc

中兴透明通道各命令使用操作指南（国外英文资料） If you dont know the different types of RRU . 1, enter and exit the  - LI LO Out of time be sure to use LO  otherwise it will lead to the use for the second time in LI  command failed 2, STA: RRU channel status query RRU STA RRU = = = RRUStat: Work! RFCh Stat: On RFCh Man Stat: On Main view RFCh Stat:  OFF instructions ON for normal mass reduction For  R8968i M1920 query results RRU STA RRU = = = SwRruWorkState: Work FreqBand: 0 LO: 180672. ChnNo # 0 TxPhy Sta: ON RxPhy Sta TxMan Sta: ON ChnNo # 1 TxPhy Sta: ON RxPhy Sta TxMan Sta: ON ChnNo # 2 TxPhy Sta: ON RxPhy Sta TxMan Sta: ON ChnNo # 3 TxPhy Sta: ON RxPhy Sta TxMan Sta: ON ChnNo # 4 TxPhy Sta: ON TxMan Sta: ON ChnNo # 5 TxPhy Sta: ON RxPhy Sta TxMan Sta: ON ChnNo # 6 TxPhy Sta: ON RxPhy Sta TxMan Sta: ON ChnNo # 7 TxPhy Sta: ON RxPhy Sta TxMan Sta: ON FreqBand: 1 LO: 180672. ChnNo # 0 TxPhy Sta: ON RxPhy Sta TxMan Sta: ON ChnNo # 1 TxPhy Sta: ON RxPhy Sta TxMan Sta: ON ChnNo # 2 TxPhy Sta: ON RxPhy Sta TxMan Sta: ON ChnNo # 3 TxPhy Sta: ON RxPhy Sta TxMan Sta: ON ChnNo # 4 TxPhy Sta: ON RxPhy Sta TxMan Sta: ON ChnNo # 5 TxPhy Sta: ON RxMan Sta: ON ChnNo # 6 TxPhy Sta: ON RxPhy Sta TxMan Sta: ON ChnNo # 7 TxPhy Sta: ON RxPhy Sta TxMan Sta: ON In The End. Main view TxPhy Stat, RxPhy Sta, TxMan Sta and RxMan Sta is ON  was qualitative  if it is OFF Theres a problem with the channel. 3, HDS  access query RRU HDS RRU = = = The FPGA Work Mode: normal Mode Carrier Enable Status: Ca1 - Enable Ca2 - Enable ca3-enable Ca4 - Disable Ca5 - Disable Ca6 - Disable RFCh Enable Or Disable Status: Ch1 - Enable RFCh Power Status: ch1-power On TxIFAttenuate (RegVal) : CH1-27 h Dh RxIFAttenuate (RegVal) : CH1-2 The tx-rx Switch Point: between ts2 and ts3 Slot PwrOnOff Status: Ts0 - onts1-onts3-onts3-onts6-ondtps-onupptes-on-on PLL Status: LO PLL: Lock IF PLL: Lock OPTIC PLL: Lock 10 m PLL: Lock Clk Status: 100 hz CLK: ok M更多… RRU 米 RRU 如果CLK:好的 光学CLK:好的 10 mhz时钟:好的 IQLINKPORTADOWN_ALM:ok IQLI