Easy CD Creator超级技巧（国外英文资料）.docVIP

Easy CD Creator超级技巧（国外英文资料） Easy CD Creator super skill Make a bootable CD Prepare a blank cd-r plate with a slightly better quality. Put the self-priming floppy disk into the A drive. Then run the Easy CD Creator, then select the file, new cd-rom plan, and boot cd-rom command to create a CD burn program. Easy CD Creator will appear boot CD type choice dialog box, click the boot CD type drop-down list box, select the floppy disk simulation (1.44 MB), put the boot floppy disk into the floppy drive, and click ok button. tip Using this method, you can only store the files in iso 9660 format with 8 + 3 filenames, which will cause us inconvenience. U Easy CD Creator will generate two files on the disc -- Bootcat. Bin and Bootimg. Bin, here are the documents required to start the system CD, if you dont want to let it show come out, can be in a formal written to the CD content, you can choose not to read the contents of the previous Session. Thus, hide the previously written content. The fact that the two files still exist does not affect the ability of the cd-rom to start the microcomputer system. Conceal the contents of the previous record Sometimes our CD burn at once is not a lot of content, then we can choose the multi-segment (MultiSessions) burn, but it is only can burn a CD - R disc, CD content once write up can not wipe off, its hard to get rid of them. In fact as long as the use of a is called the Session before the Selector tool can easily will burn a (Session) content of hidden, if what time want to use this tool to switch to activate the switch, so as to achieve the confidentiality. Copy the encrypted disk Some CD is not written in standard format, so some file will not copy, this dish only for the use of the limited user, because cant copy, therefore cannot burn it to CD, actually Easy CD Creator suite has a program called CD Copier, it can copy a CD, a complete copy of CD and the motherboard is the same, so it can be used to copy the encrypted disk. Convert