intouch DAserver配置（国外英文资料）.doc

intouch DAserver配置（国外英文资料） Without using Siemenss Simaticnet software, SIDirect DAS Server can access the S7 200, S7 300, and S7 400 family PLC through standard Ethernet CARDS. SIDirect DAServer can connect Windows client software such as Wonderware InTouch through DDE, FastDDE, SuiteLink, OPC protocol. Before you start, make sure you meet the following criteria: Read carefully and follow SIDirect DAServers Readme file and associated documents to get the system requirements needed by SIDirect DAServer, the correct installation process, the operating system, and so on. 2. Install SIDirect DAServer, if you have installed a previous version of SIDirect DAServer, please use the control panel in the add/remove programs uninstall, this Tech Note use SIDirect DAServer version 1.1. Install and configure Ethernet and TCP/IP protocols. Confirm that you can Ping the PLC you want to connect to. Note: please read the SIDirect DAServers online documentation about the supported hardware and software parts, and SIDirect DAServer supports only TCP/IP communication, not MPI, Profibus, and other non-ethernet methods. Configuration SIDirect DAServer Select the start/program on any column to start SIDirect DAServer. Find the Wonderware folder containing the System Management Console program and click start the System Management Console program. Find the SIDirect DAServer under the DAServer Manager tree in the ArchestrA System Management Console (SMC). Under the Local node, DAServers name is ArchestrA. Dassidirect.1. See figure 1: Figure 1. DASSIDirect DAServer in SMC Expand the ArchestrA, DASSIDirect. 1, and select Configuration, and the following Global Parameters dialog will appear (figure 2) : Figure 2. DASSIDirect - Global Parameters Device Group Update Interval: defines the default Update Interval for the Device Group The Slow Poll Interval defines the time Interval for the DAServer query device when the problem enters the Slow Poll mode. When the communication is back to normal,